Shocktech Autococker Pnuematics Kit Black

LPC: A high flow gas block screw couples to an air chamber reservoir giving your mini cocker as much air behind the valve as it will ever need. Under fast, sustained strings of paint the mini cocker style front end can allow for some “beat down”, this loss of velocity and therefore loss of distance truncates to you being out gunned. But just because we love you we made these! Now love us back and but it!

FGP: Danny worked closely with our good friend David Galsworthy (deceased),  the founder of Sterling / Proline to  produce a low pressure regulator that will work under the most adverse conditions. With a massive air chamber on the low pressure side to provide a smooth flow of controlled air to drive your pneumatics. That goes along with a simple “remove and replace” schrader pin for a reg that is rebuildable in minutes. No more mail in service, just r and r and go!

BOMB 2: The same outrageous performance as our original bomb, but with an updated look. 
Years ago Danny Love discovered that by adding a third o-ring to the shaft of a 4-way he could shorten the stroke and up the speed of movement. Thereby increasing the rate of fire, the smoothness of the trigger pull, and the overall performance of any autococker we installed it on. 

The design caught fire and wound up being copied by nearly every gun builder and manufacturer. However nobody could quit duplicate the performance because Danny also had incorporated a proprietary o-ring formula. Due to the high volume of requests we have brought back the Bomb along with the original o-ring form the same manufacturer.